 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CPCN fixed ceramic melf resistor EU features * Suitable for noise suppression of engine ignition system * Reliable in pulse/transient applications * Marking: Gray body color with no marking * Products meet EU RoHS requirements dimensions and construction L Lc Size Code CPCN1/2 D CPCN1 CPCN2N Resistive Body Inner End Electrode Cap CPCN3 L Dimensions inches (mm) Lc (min.) D .213 (5.4) .378 (9.6) .452 (11.5) .394 (10.0) .138.004 (3.50.1) .187.012 (4.750.3) .187.012 (4.750.3) .283.012 (7.20.3) Cap Plate Type Ni Ni Ni Sn .421.02 (10.70.5) .63.024 (16.00.6) .720.024 (18.30.6) .720.024 (18.30.6) ordering information New Part # CPCN Type 2N Power Rating Symbol 1/2: 0.5W 1: 1.0W 2N: 1.5W 3: 2.0W 502 Nominal Resistance 2 significant figures + 1 multiplier M Tolerance M: 20% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/28/08 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 95 resistors CPCN resistors fixed ceramic melf resistor applications and ratings Part Designation CPCN1/2 CPCN1 CPCN2N CPCN3 Power Rating 0.5W 1.0W 1.5W 2.0W -1200300 1k, 5k, 10k, 15k 15k M: 20% T.C.R. (ppm/C) Max. Nominal Resistance Resistance Tolerance Absolute Maximum Working Voltage 86V 122V 150V 173V Absolute Maximum Overload Voltage 215V 305V 375V 432V +40C -40C to +200C Rated Ambient Temperature Operating Temperature Range Coating type of CPCN2N is available on request. Rated Voltage = Power Rating x Resistance Value or Maximum Working Voltage, whichever is lower. environmental applications Derating Curve 100 80 % Rated Power 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 Ambient Temperature (C) Performance Characteristics Parameter Resistance Requirement R Limit Typical -- -- -- 0.3% -- Within regulated tolerance -1200300ppm/C T.C.R. 0 ~ -0.2%/V Voltage Coefficient Overload 2% Load Life at High Voltage Pulse 30% Resistor Body Strength No mechanical damages -- Rapid Change of Temperature Moisture Resistance Load Life Low Temperature Operation High Temperature Exposure 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% 0.9% 0.7% 0.7% 2.0% Test Method Measurement Voltage Resistance 1k, 5k 10V 10k, 15k 30V +25C/-40C and +25C/+125C Rated voltage and rated voltage x 10% Rated voltage x 2.5 or max. overload voltage for 5 seconds, whichever is less Continuous 250h high voltage pulse on the test circuit (Refer to JIS D5111) Type Holding Distance Time Force CPCN1/2 5.0 0.2mm CPCN1 9.0 0.3mm 98N (10kgf) 10 seconds CPCN2N 12.3 0.3mm CPCN3 490N (50kgf) -55C (15 minutes), +155C (15 minutes), 500 cycles 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 40C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle -40C, 24 hours +200C, 1000 hours The resistance measurement before and after the examination should be performed in room temperature with difference 1C. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 5/16/06 96 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com |
Price & Availability of CPCN2N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |